SpecGREEN


Filtered By CSI: 03 40 00 - Precast Concrete

Remove Filter

Looking for sustainable products to specify in your next green building project? CADdetails has uncovered the latest in green building products and environmentally friendly design practices developed to support architects, builders, building owners and designers in their efforts to build and maintain sustainable sites. Follow the links below to learn about CADdetails.com SpecGREEN manufacturers and how the green products they offer may contribute towards the LEED® (Leadership in Energy and Environmental Design) certification of your next commercial or residential building or interior design.


Amvic Insulated Concrete Forms (ICF) is an excellent green building alternative. The polypropylene webs are placed 6” vs. 8” o/c, allowing most cut-off pieces to be re-used which can result in less than 1% construction waste compared to 6%. The webs are also manufactured using 100% recycled polypropylene making the product over 60% recycled material by weight. Amvic ICF structures also require 30-50% less energy to heat and cool, improve indoor air quality and require less maintenance over time. In addition, Amvic recently conducted an industry leading third party LEED Product Assessment which proved that using Amvic ICF can result in up to 28 points!


100% Post-consumer recycled glass can be added to Dawn Enterprises concrete products, along with reclaimed aggregates and fly ash, to achieve a mixture that is approximately 75% recycled content overall. In fact, under the "MR" credit category for LEED project certification, their waste receptacles satisfy both "Re-used Products" and "Recycled Content" criteria.


Eco-Wares® (est. 2001) is the sales division of Envirosafe Manufacturing Corporation (est. 1993). We are a direct ship manufacturer specializing in environmentally safe sealers, cleaners & coatings for concrete, masonry, porous stone and shingle roofs. Each product line is subject to extensive tests to ensure that the materials greatly exceed State and Federal EPA guidelines. All products are made in the USA at our Melbourne, Florida plant.


Because Fox Blocks’ parent company, Airlite Plastics, is making plastic products for multiple industries, there is a constant supply of first-generation recycled material. This material moves within our own facilities, reducing costs and making for a smaller carbon foot print. The resulting insulated foam and plastic ties are of a higher quality and have greater consistency. At Airlite Plastics, there are a large number of machine presses molding plastic products to specific tolerances. Anything that does not meet the specification for the different product specifications is set aside and designated as usable plastic waste (scrap) to be recycled. None of this plastic scrap leaves the plant, so there is ZERO plastic landfill contribution. These out-of-spec products are transferred under the same roof to the Recycling Area. While at the recycling station, the plastic scrap is mechanically ground into flakes, pelletized, and then put through a proprietary process to be remanufactured. This 1st generation recycled plastic is then transferred to the production machine presses to mold Fox Blocks ICF plastic webs and corner brackets. These fresh molded webs and corner brackets are then delivered to the EPS Division plant, on site, for placement into the foam molds that produce finished Fox Blocks Insulated Concrete Forms. This internal recycling process dramatically lowers the overall ICF manufacturing carbon footprint because there are minimal transportation costs, as everything is performed on site. So, Fox Blocks not only contributes to sustainability by constructing long-last buildings resilient to extreme weather events, we support sustainability and recycling in our manufacturing processes.


SportMaster Sport Surfaces are manufactured in Sandusky, Ohio. If your project is located within a 500 mile radius of this location, the products are considered to be locally produced material and can help contribute to earning MR Credit 5.1.


Using VERSA-LOK Retaining Wall Systems can help contribute toward qualifying your commercial, municipal or homebuilding project for credits under the Leadership in Energy and Environmental Design (LEED) program. LEED is a rating and certification system designed by the U.S. Green Building Council to encourage the use of sustainable technologies that reduce energy use and conserve natural resources. LEED-certified facilities will experience reduced maintenance and life-cycle operation costs. Recognizing that, many architects, builders and specifiers are now writing LEED certification requirements into bid specifications. That’s where VERSA-LOK Retaining Wall Systems can help.