NAC Products
Designers Microsite |
POWERED BY CADdetails.com
Designers Microsite |

NAC TAC II Primer


CAD Drawings NAC Products NAC TAC II Primer
NAC TAC II is a non-flammable, water-based primer for use in interior applications that are on grade or above grade. NAC TAC II is a pre-mixed formula that requires no thinning, establishes a permanent bond in 48 hours and will not re-emulsify.

Application:
Substrate temperature must be a minimum of 65ºF (18°C) for 24 hours prior to application.

NAC TAC II can be applied with a short nap roller, brush, trowel or sprayer.  Allow NAC TAC to dry until tacky to touch, but non-transferable to finger. This may take as little as 10 minutes, but usually no more than 45, depending upon temperature, humidity, internal moisture level/porosity of substrate and application thickness.  

Tile may be set immediately after membrane is installed on horizontal surfaces.   

 


Listing Back To Top

Design Visualizer

NAC TAC II Primer

Downloads

Architectural Product Information

About Media

CAD Toolbar

CADdetails™
PDF DWF DWG Printable CAD VWX

Connect, Share, Save