NAC Products
Designers Microsite |
POWERED BY CADdetails.com
Designers Microsite |

NS 97 Primer


CAD Drawings NAC Products NS 97 Primer
NS97 is a non-flammable, solvent-based primer for use in exterior applications. NS97 is a pre-mixed methylene chloride formula that requires no thinning, establishes a permanent bond in 48 hours and will not re-emulsify.

Application:
Substrate temperature must be a minimum of 55ºF (13°C) for 24 hours prior to application.

NS97 can be applied with a short nap roller, brush, trowel or sprayer.  Allow NS97

to dry until tacky to touch, but non-transferable to finger. This may take as little as 10 minutes, but usually no more than 45, depending upon temperature, humidity, internal moisture level/porosity of substrate and application thickness.  

 Tile may be set immediately after membrane is installed on horizontal surfaces.  If water test is required, allow 48 hours to cure.

Listing Back To Top

Design Visualizer

NS 97 Primer

Downloads

Architectural Product Information

About Media

CAD Toolbar

CADdetails™
PDF DWF DWG Printable CAD VWX

Connect, Share, Save