Miller Edge Inc. |
Designers Microsite
POWERED BY CADdetails.com
Miller Edge Inc.

GEM Gate Edge Module


The Gate Edge Module (GEM) converts a10K resistive edge signal to a pulsed or N.C. monitored signal allowing for compatibility with nearly all brands of 2016 UL325 compliant gate operators. For operators requiring a 2-wire pulsed signal, specify GEM-102; 4-wire pulsed signal, specify GEM-103; Normally Closed signal, specify GEM-104.


Note:

• Tested with most listed commercial gate operator manufacturers

• Complies with the UL 325-2016 Standard

• May be used as the required monitored device or as an ancillary device


Before designing or motorizing any gate, be sure to read and understand the ASTM-F2200 standard for gate construction. Additionally, since 2009, the International Building Code (IBC-2009) has required compliance with the current UL 325 safety standard.


Miller Edge offers a convenient guide to help you comply with the ANSI/UL 325 standard for gate entrapment protection devices. To request a printed copy of this guide, please email [email protected]

CAD Drawings Miller Edge Inc. GEM Gate Edge Module
CAD Drawings Miller Edge Inc. GEM Gate Edge Module
CAD Drawings Miller Edge Inc. GEM Gate Edge Module

Listing Back To Top

Design Visualizer

Design Visualizer

GEM Gate Edge Module

Downloads

Architectural Product Information

About Education Specs Media

CAD Toolbar

CADdetails™
PDF DWF DWG Printable CAD VWX DXF